Marstek Energy PH
Marstek CT002 Smart Meter

Solar and components

CT002 Smart Meter

The battery's eyes on your supply.

Three-phase smart energy meter, up to 100 A per channel

₱4,500₱5,000

Save ₱500

Reads what the house is drawing in real time so the battery knows when to charge and when to discharge. Required for anti-feed-in and the app's automatic modes.

Published price, unit only. Delivery and installation are quoted separately after a short call.

About the CT002 Smart Meter

Without a meter, a battery is guessing. The CT002 clamps onto your main line and reports consumption and generation in real time, which is what lets the system charge from surplus solar instead of from the grid, and discharge when the house is actually drawing.

It is required for anti-feed-in mode — stopping the system exporting to the grid — which matters where net metering is unattractive or not yet approved.

Three-phase capable at up to 100 A per channel, or usable as a three-point single-phase meter. DIN-rail mounted, so it goes inside your existing breaker box and should be fitted by an electrician.

Features

  • Model TPM-100CTW
  • Accuracy ±1%
  • Capacity Up to 100 A per channel
  • Phases Three-phase, or 3-point single-phase
  • Supply 100–260 V AC, 50/60 Hz
  • Connectivity Wi-Fi 2.4 GHz and Bluetooth
  • Consumption Under 2 W
  • Working temperature −20 to 40 °C
  • Mounting DIN rail, by an electrician
  • Size 6.5 × 8.3 × 2.6 cm
  • Warranty 10 years

Specifications

ModelTPM-100CTW
Accuracy±1%
CapacityUp to 100 A per channel
PhasesThree-phase, or 3-point single-phase
Supply100–260 V AC, 50/60 Hz
ConnectivityWi-Fi 2.4 GHz and Bluetooth
ConsumptionUnder 2 W
Working temperature−20 to 40 °C
MountingDIN rail, by an electrician
Size6.5 × 8.3 × 2.6 cm
Warranty10 years

Installation and connectivity

  • DIN-rail mount inside your breaker box, by an electrician
  • Three-phase, or three-point single-phase
  • Wi-Fi and Bluetooth with remote firmware updates
  • Works with the Venus, Jupiter and Saturn series

Why this one

Why the CT002 Smart Meter

The battery stops guessing

Real-time readings of what the house is drawing, so the system charges from surplus rather than from the grid.

Anti-feed-in

Stops the system exporting to the grid, which matters where net metering is unattractive or not yet approved.

Required for automatic modes

The app's AI optimisation and self-consumption modes need this meter to work at all.

Fits your existing board

DIN-rail mounted at under 2 W, three-phase capable to 100 A per phase.

Works with

Complete the system

These are the parts most people add to a CT002 Smart Meter. Not required, but worth knowing before you buy.

Venus E 3.0

5.12 kWh plug-and-play AC-coupled home battery

₱120,000₱179,000

Plugs into a dedicated outlet and works alongside any existing solar setup — no inverter swap, no rewiring. Cuts over within 20 ms when the grid drops, so the fridge and router never notice.

View details

Mars I Plus — Single-Phase

6 kW single-phase hybrid inverter + 15.36 kWh all-in-one residential ESS

₱390,000₱445,000

Inverter and stacked battery modules in one tower, meant for a new solar installation rather than an add-on. Recommended set is one inverter with three battery modules.

View details

Other solar and components

Nfinity Solar Panel

N-type bifacial double-glass module, 695–720 W

₱12,000₱15,000

Bifacial, so it also collects light reflected off the roof surface — up to 936 W in the right mounting. Double-glass rather than backsheet.

View details

Single-Phase SmartBox

Whole-home backup switchboard for the Venus series

₱25,000₱30,000

Turns a Venus battery into whole-home backup instead of just a few circuits. Runs 220/230 V at either 50 or 60 Hz, so it suits Philippine supply.

View details